Categories
Maintenance

Maintenance: Disassembly

Removing the main body from the base

There are two main methods for the common Clutch Popper Chevy models. For both you’ll need a number 10 size star type Allen key or screwdriver. The Chevelle type (bonnet/hood screw) has standard Phillips head screw. You don’t want to do this procedure too many times, as each time you unscrew/re-screw you will be wearing down the thread channel in the plastic.

Chevy Monza & Vega (Red & Blue)

These two both have a ‘turbo’ block piece on the top of the front bonnet/hood, the screw on the underside in the front of the base screws into this block. Unscrew this screw (I find it easiest with an allen key star type), then lift the top off, the two tabs at the back will slip forward out of the base.

There is a plastic dust cover over the motor, remove this for maintenance but it is important not to lose and put put it back on before reassembling. That plastic cover does a very good job keeping dust and crap from getting sucked into the internal gears, which over time would clog it up, slow it down, and be much more difficult to fix.

Follow the listed maintenance steps described here, as with all of the models you’ll want to give everything a good clean while you have the body and parts separate so that you reduce the number of times it gets taken apart.

Chevy Chevelle (Yellow)

This one (and models of this type) has screw (Phillips head) going the other direction, and is in the top of the front bonnet/hood, under the decal, going down into the base. You’ll need to lift the decal to get at it so this one’s a bit more annoying and intrusive. If the car is already pretty beat up (good chance) then it doesn’t really matter that much and you could just lose the bonnet decal (can look really good – see here), if you’re not a fan of that then you’ll just need to be careful.

Once you’ve got that screw out it’s the same as above for the other Chevy types.

Follow the listed maintenance steps as per the other models, as with all of these you’ll want to give everything a good clean while you have the body and parts separate so that you reduce the number of times it gets taken apart.

Leave a Reply

Your email address will not be published. Required fields are marked *